Errors in Chaining | Surveying
1) Instrumental errors: These errors are due to faulty adjustments or imperfections of the instruments such as chain or tape…
1) Instrumental errors: These errors are due to faulty adjustments or imperfections of the instruments such as chain or tape…
1. Vertical deflection of gantry girder for electrically operated cranes over 500 KN is _____. [A] span/400[B] span/750[C] span/500[D] span/1000…
1. In steel structure design, check for lateral torsional buckling is required for _____. [A] Axial column[B] Laterally unsupported beam[C]…
1. The fasteners in gusseted base plate are designed for _____. [A] 25% column load[B] 50% column load[C] 75% column…
1. According to IS 800:1984, lacing bars should resist a transverse shear equal to ____ of the axial load in…
1. The effective slenderness ratio for laced column shall be _____ times the maximum actual slenderness ratio to account for…
1. What is the value of Maximum effective slenderness ratio (KL/r) for a member carrying compression loads resulting from dead…
1. As per IS: 800, the splice connection should be designed for a force of at least k times the…
1. The effective length of the fillet weld is given by ______. [A] Total weld length[B] Total weld length less…
1. End returns in fillet welds should not be less than ______. [A] Twice of size of the weld[B] 1.5…