1. End returns in fillet welds should not be less than ______.
[A] Twice of size of the weld
[B] 1.5 times of size of weld
[C] Size of the weld
[D] 0.5 times of size of weld
Answer: Option A
2. The minimum size of the fillet weld that can be used is _____.
[A] 2 mm
[B] 4 mm
[C] 3 mm
[D] 5 mm
Answer: Option C
3. An example of light moment connection is _____.
[A] Split beam connection
[B] Unstiffened seat connection
[C] Clip angle connection
[D] Framed connection
Answer: Option C
4. To transfer large shear force through connection, which of the following option is most suitable?
[A] Clip angle connection
[B] Bracket connection
[C] Stiffened seated connection
[D] Framed connection
Answer: Option C
5. If ‘L’ is the length of the weld and ‘s’ is the size of the weld, then the effective length of a fillet weld is _____.
[A] L-2s
[B] L + 2s
[C] L-4s
[D] L + 4s
Answer: Option A