1. The effective length of the fillet weld is given by ______.
[A] Total weld length
[B] Total weld length less twice the throat size
[C] Total weld length less weld size
[D] Total weld length less twice the weld size
Answer: Option D
2. What is the value of Partial Safety Factor for Shop Fabricated Welds?
[A] 1.10
[B] 1.20
[C] 1.25
[D] 1.50
Answer: Option C
3. The prying forces are additional ______.
[A] Shearing forces on the bolts because of long joint
[B] Bending forces on the bolts because of long joint
[C] Tensile forces due to the flexibility of connected parts leading to deformation
[D] Forces due to friction between the connected parts
Answer: Option C
4. In case of industrial steel structure, sag rods are designed as ______.
[A] Torsional member
[B] Compression member
[C] Bending member
[D] Tension member
Answer: Option D
5. The permissible stress in axial tension in steel member on the net effective area of the section shall not exceed the following value (Note: fy is the yield stress)
[A] 0.80 fy
[B] 0.60 fy
[C] 0.75 fy
[D] 0.50 fy
Answer: Option B